Cylinder blocks are generally known by the term engine block. It’s recognized as the engine’s heart and one of the primary engine parts. Cylinder blocks play a vital role in the engine’s lubrication, temperature control, and engine stability.
【Application】
– Passenger car
– Commercial vehicle
【Work piece material】
– Cast iron
– Aluminum
The cylinder head sits above the cylinders and forms the roof of the combustion chamber. In side valve engines, the head is a simple sheet of metal; whereas in more modern overhead-valve and overhead-camshaft engines, the cylinder head is a complex block containing a passage to insert and expel air and coolant.
【Application】
– Passenger car
– Commercial vehicle
【Workpiece material】
– Cast iron
– Aluminum
A camshaft is a rod that contains a row of pointed cams for converting rotational motion into reciprocating motion. Camshafts are used in piston engines (to control the air intake and exhaust valves), mechanically controlled ignition systems, and early electric speed controllers.
【Application】
– Passenger car
– Commercial vehicle
【Work piece material】
– Cast iron
– Aluminum
A crankshaft is a mechanical component typically used in piston motors to transform the reciprocating movement into a rotational motion. The crankshaft is a rotating shaft that contains one or more crank pins, which are driven through connecting rods by pistons.
【Application】
– Passenger car
– Commercial vehicle
– Ship
【Work piece material】
– Cast iron
A component having internal splines that slide on the transmission output-shaft external splines, allowing the drive line to adjust for variations in length as the rear axle assembly moves.
【Application】
– Passenger car
– Commercial vehicle
– Construction machinery
【Work piece material】
– Cast iron
A shaft is a rotating machine component, usually circular, used to transfer power a machine that produces power to a machine that absorbs power. Transmission shafts are used to transmit power between the source and the machine absorbing it; for example, counter shafts and line shafts.
【Application】
– Passenger car output shaft and input shaft
– Commercial vehicle output shaft and input shaft
– Construction machinery output shaft and input shaft
【Work piece material】
– Cast iron
In vehicular suspension, a control arm, also known as an A-arm, is a hinged suspension link that connects the chassis to the suspension upright or frame that holds the wheel. Put simply, it controls the up-and-down movement of the wheel during travel over uneven road sections.
【Application】
– Passenger car
– Commercial vehicle
– Electric vehicle
【Workpiece material】
– Cast iron
– Aluminum
A connecting rod also called a ‘con rod,’ is part of the engine piston that connects to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the crankshaft. The connecting rod is necessary for transmitting compressive and tensile forces from the piston.
【Application】
– Passenger car
– Commercial vehicle
– Electric vehicle
【Work piece material】
– Cast iron
– Aluminum
In automotive suspension, a steering knuckle or upright is the part that contains the wheel hub or spindle and attaches to the suspension and steering components. The terms spindle and hub are sometimes used interchangeably with steering knuckles but refer to different parts.
【Application】
– Passenger car
– Commercial vehicle
– Electric vehicle
【Work piece material】
– Cast iron
– Aluminum
An axle or axletree is a central shaft for a wheel or gear that is turned to revolve. For wheeled vehicles, the axle can be shaped to attach to the wheels and rotate with them, or it may be shaped to be attached to the vehicle and rotate around the axle.
【Application】
– Passenger car
– Commercial vehicle
– Construction machinery
【Work piece material】
– Cast iron
A gear reducer is a mechanical system of gears in an arrangement such that input speed can be lowered to a slower output speed but produce the same or increased torque. The operation of a gear reducer involves a set of rotating gears that are attached to a shaft that has a high incoming speed, which is sent to a set of rotating gears where the speed or torque is changed.
【Application】
– Construction machinery
– Agricultural machinery
【Work piece material】
– Cast iron
Gear boxes are simply a set of machinery and their casings. Gearboxes that are used to receive power and transfer it to another are often found in cars, turbines, and heavy machinery.
【Application】
– Construction machinery
– Agricultural machinery
– Elevator
【Work piece material】
– Cast iron
【Application】
– Aerospace
– Space science and technology
【Work piece material】
– Titanium
The Transmission housing protects the components of the gearbox. It provides a fluid-tight casing to hold the lubricants and provides support to moving components.
【Application】
– Passenger car
– Commercial vehicle
【Work piece material】
– Aluminum
The Transmission housing protects the components of the gearbox. It provides a fluid-tight casing to hold the lubricants and provides support to moving components.
【Application】
– Passenger car
– Commercial vehicle
【Work piece material】
– Aluminum
The clutch housing is an important part of a powertrain system, providing a protective cover for the clutch components such as the disc, assembly, release bearing, and more.
【Application】
– Passenger car
– Commercial vehicle
【Work piece material】
– Aluminum
Motor housing is the equipment that protects the internal electric DC motor bodies from dust and damage. These motor housings also provide the motor a reliable and consistent functionality and a desirable performance.
【Application】
– Passenger car
– Commercial vehicle
– Electric vehicle
【Work piece material】
– Aluminum
The housing of the pump is casting the internal parts of a pump. This part is a key element because it does work to protect the interior of the pump to control rain and ambient pressure.
【Application】
– Passenger car
– Commercial vehicle
– Construction machinery
– Electric vehicle
【Work piece material】
– Cast iron
– Aluminum
【Application】
– Passenger car
– Commercial vehicle
– Construction machinery
– Agricultural machinery
– Electric vehicle
【Work piece material】
– Cast iron
– Aluminum
【Application】
– Passenger car
– Commercial vehicle
– Construction machinery
– Agricultural machinery
– Electric vehicle
– Electronic product
Hydraulic valve blocks are machine parts that act as junctions between components in a Hydraulic System to regulate fluid flow. Some of the elements that utilize these blocks include pumps and actuators.
【Application】
– Passenger Car
– Commercial Vehicle
– Hydraulic system
【Work piece material】
– Cast iron
– Aluminum
The valve body is the nerve center of the automatic transmission. It is responsible for creating smooth shifts to the appropriate gear when driving. It does this by directing hydraulic fluid through a maze of channels and passages that activate the appropriate clutch pack or band.
【Application】
– Passenger car
– Commercial vehicle
– Construction machinery
– Agricultural machinery
– Electric vehicle
【Work piece material】
– Cast iron
– Aluminum
The valve is at the core of the main hydraulics systems, it is the power source of construction machinery.
【Application】
– Construction machinery
【Work piece material】
– Cast iron
– Aluminum
Structural component is a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).
【Application】
– Electric vehicle battery case
– Electric vehicle rear car bracket
– Construction machinery truck jib
– Aircraft landing gear
– Aircraft engine case
【Application】
– Automobile parts
– Fluid valve body
– Gas valve body
– Electronic product
【Work piece material】
– Cast iron
– Aluminum
– Copper
The caliper houses the brake pads and pistons of the car, which ultimately means the brakes. The caliper’s main purpose is to slow the car’s wheels by generating friction with the brake rotors.
【Application】
– Car Calipers
– Motorcycle Calipers
【Work piece material】
– Cast iron
– Aluminum
A scroll compressor is a device for compressing air or refrigerant. It is used in air conditioning equipment, as an automobile supercharger, and as a vacuum pump.
